Learn how to easily repair a cracked car bumper’s ABS plastic
Instructional Videos
Ford Focus Repair Video #1
Ford Focus Repair Video #2
Ford Focus Repair Video #3
Step-By-Step Instructions
Step 1
If you can tape the damage back together with masking tape, you can do the repair.
Do NOT try to use the resin to put the pieces back together – you will only distort the bumper. Hold the pieces together tightly as possible with masking tape. When you are done, replace any missing pieces with the supplied ABS stock.
Start the repair from the back side and remove all paint, dirt, and/or grease from 1/4″ around all areas to be repaired.
Apply the resin directly from the bottle – NO MIXING REQUIRED. The repair will air cure in about 24 hours.
See the video below to see how strong the chemical weld is.
Step 2
Go back to the front side and remove the tape. Using a dremel or a drill V groove out the cracks.
Step 3
Fill the cracks and any low or uneven areas with the resin.
Allow 24 hours for the resin to air cure.
Step 4
After 24 hours, you can start to sand the repaired area. You can start with 120 grit paper and change to 220 grit to finish. The repair will sand perfectly flat and smooth because the repair is the same ABS compound as the surrounding bumper.
Step 5
Do NOT use any fiberglass fillers or any other product that uses a hardener or catalyst. These products will not stay in place and will in time crack and fall out. You can use a spot putty that is designed to be used on flexible material but do not put it on very thick.
Step 6
When perfectly smooth prime with a good quality primer designed for plastic surfaces. Sand with 400 grit paper.
Quarical Easy ABS Repair is a single part ABS Repair resin designed to permanently repair any ABS plastic. Other 2 part “epoxy” type products will not penetrate into the ABS but sit on the surface. These epoxy type products expand, contract, and flex differently than the ABS plastic they are trying to repair and in the end they will ALL fail. Quarical Easy ABS Repair unlike the others is made of ABS plastic and becomes part of what you are repairing. The resin is very thick (about like a heavy Greek yogurt) and contains 50% ABS solids. As the solvents evaporate the new ABS is welded into the existing ABS being repaired. The cured product is hard, shiny, and welded permanently into the repair. When used to repair any ABS plastic Quarical Easy ABS Repair makes a permanent waterproof repair. Fix it once and be done. Used for Plumbing Repair, Repairing Automotive Plastics, RV Holding Tanks, and Motorcycle Fairings Quarical Easy ABS Repair is a easy to do it yourself repair kit.. Easy to use on any ABS with a 3 year shelf life make the easy ABS repair kit a valuable addition to your tool box. There are currently 27 repair videos on this website. Look at the Video tab and see a how to video on your repair.
Quarical Easy ABS Repair was invented in 2004 after years of trying to fix ABS motorcycle fairings. After all of the other products failed I came up my own formulation and all I can say is IT WORKS !!! Quarical Products Inc. is a different kind of company. We make a quality product and stand behind it 100%. When you Call the toll free number you get ME on my cell and my 25 years’ experience repairing ABS plastic working for you. I am committed to helping you make your repairs. Check out the Comments and the Blog and you will see what my customers say.
I am The ABS Repair Guy
Ron Harker
Find more ways to use Easy ABS Plastic Repair Kit! Or follow us on Facebook to learn more!
